Li-clamp tsa hose li sebelisoa haholo ho tiisa le ho koala li-hose le li-tubing ho li-fittings le liphaephe.Li-clamps tsa Worm drive hose li ratoa haholo hobane lia fetoha, li bonolo ho li sebelisa ebile ha li hloke lisebelisoa tse khethehileng - screwdriver, nut driver kapa socket wrench ke eona feela e hlokahalang ho kenya le ho tlosa.The captive screw/worm gear mates a nang le slots ka har'a bente ho lokisa bophara ba clamp holim'a sebaka se itseng.Sehlopha se ka lokolloa ka botlalo (ho buloa) kahoo li-clamps tsa hose li ka kenngoa holim'a li-hose le li-tubing tse seng li ntse li le teng.Li boetse li sebelisoa bakeng sa mefuta e fapaneng ea lits'ebetso tseo e seng li-hose, joalo ka ho hokela kapa ho hokahanya ntho e 'ngoe ho e' ngoe.Li-clamp tsa hose li ka sebelisoa hape hape li tsejoa e le:

lihlope tsa ho khanna seboko, liqhoele tsa lisebelisoa tsa seboko, li-screw screw.

Hose clamp size e bua ka bophara ba eona ba clamping, e thathamisitsoeng e le bophara ba bonyane le boholo bo ka sebelisoang, ka lisenthimithara;li-clamp tse ling li boetse li hlalosoa ke boholo ba bona ba SAE (Society of Automotive Engineers).E le hore u tsebe boholo bo hlokahalang, kenya hose (kapa tubing) holim'a sefepi kapa phaephe (e atolosang phaipi), lekanya bophara bo ka ntle ba hose, ebe u khetha seqhoqho se lumellanang le bophara boo hoo e ka bang bohareng ba sebaka seo e leng ho sona.Haeba sedikadikwe se ka ntle sa hose se tsejwa, se arole ka 3.14 (pi) ho fetolela circumference ho bophara.

Li-clamp tsa li-hose tse tloaelehileng ke tsona tse atileng haholo 'me li fumaneha lits'ebetsong tsa likoloi le tsa indasteri.Bophahamo bo fokolang ba clamp ke 3/8 ″ mme boholo bo tloaelehileng bo ka ba 8 7/16 ″.Li na le 1/2 ″ lihlopha tse bophara le 5/16 ″ slotted hex head screws.Li-clamps tsena li kopana kapa li feta litlhaloso tsa torque ea SAE.

Li-clamp tsa li-hose tse nyane li sebelisoa ka li-hose tse nyane tsa bophara le li-tubing joalo ka mehala ea moea, mokelikeli le mafura.Bophahamo bo tlase ke 7/32 ″ mme boholo bo ka ba 1 3/4 ″.Lihlopha li bophara ba 5/16 ″ 'me screw ke 1/4 ″ e slotted hex hlooho.Boholo ba tsona bo nyane bo lumella ho kenngoa libakeng tse koaletsoeng.

Leha li-clamp tsa hose li ka hokahanngoa ho tloha pheletsong ho isa pheletsong ho theha tloaelo kapa boholo bo boholo, nahana ka ho sebelisa Create-A-Clamp ho fapana le ho etsa li-clamp tse fihlang ho 16 ft bophara.Li-Kits li kenyelletsa 50 ft roll ea 1/2 ″ e bophara ba banding e bolelele ba eona habonolo, li-fasteners tse 20 (li-slotted band ends le matlo a nang le captive screw/worm gear), le likaroloana tse 10 tsa ho kopanya bolelele bo bokhutšoane ba banding.Likarolo tsohle ke tšepe e sa hloekang 'me 5/16 ″ slotted hex head screws ke maemo.Ho fapana le litsamaiso tse ling tsa banding/strapping, ha ho na lisebelisoa tse khethehileng tse hlokahalang ntle le tin snips le screwdriver kapa hex driver.Li-hose clamps tsena tsa worm drive hose li ka tlosoa habonolo le ho kenngoa hape, kapa tsa etsoa tse nyane kapa tse kholoanyane (khaola banding ho etsa tse nyane; sebelisa splice le banding e eketsehileng ho etsa kholoanyane).

Li-clamps tsa li-hose tsa tšepe tse sa hloekang, tse buelloang bakeng sa lisebelisoa tse ngata, li na le sehlopha sa tšepe e sa hloekang;screw plated le housing fana ka toka kutu.Bakeng sa ho hanyetsa kutu e ntle, khetha li-clamps tsohle tsa tšepe tse sa hloekang, tse nang le bante ea tšepe e sa hloekang, screw le matlo.Li-clamps tsena tsa boleng ba hose li entsoe ke moetsi oa malapeng.

Ho li-fittings tsa barb e le 'ngoe, beha sekoti sa hose sebakeng sa phomolo.Ho li-fittings tse ngata tsa barb, etsa bonnete ba hore clamp e behiloe holim'a li-barbs.Se ke oa feta torque e khothalelitsoeng ea ho tiisa bakeng sa clamp.

Li-clamps tsena ha li khothalletsoe hore li sebelisoe ka li-hose tse bonolo, tse kang silicone, hobane hose e ka fetisoa kapa ea kuta ka li-slots tsa sehlopha.Hape, etsa bonnete ba hore clamp eo u e khethang e loketse ts'ebeliso.