Li-clamp tsa hose li sebelisoa haholo-holo ho tiisa le ho koala li-hose le li-tubing ho li-fittings le liphaephe.Li-clamps tsa Worm drive hose li ratoa haholo hobane lia fetoha, li bonolo ho li sebelisa ebile ha li hloke lisebelisoa tse khethehileng - screwdriver, nut driver kapa socket wrench ke eona feela e hlokahalang ho kenya le ho e tlosa.The captive screw/worm gear mates a nang le slots ka har'a bente ho lokisa bophara ba clamp holim'a sebaka se itseng.Sehlopha se ka lokolloa ka botlalo (ho buloa) kahoo li-clamp tsa hose li ka kenngoa holim'a li-hose le li-tubing tse seng li ntse li le teng.Li boetse li sebelisoa bakeng sa mefuta e fapaneng ea lits'ebetso tseo e seng li-hose, joalo ka ho hokela kapa ho hokahanya ntho e 'ngoe ho e' ngoe.Li-clamp tsa hose li ka sebelisoa hape hape li tsejoa e le:

lihlope tsa ho khanna seboko, liqhoele tsa lisebelisoa tsa seboko, li-screw screw.

Hose clamp size e bua ka bophara ba bona ba clamping, e thathamisitsoeng e le bophara ba bonyane le boholo bo ka sebelisoang, ka lisenthimithara;li-clamp tse ling li boetse li hlalosoa ke boholo ba tsona ba SAE (Society of Automotive Engineers).Ho fumana hore na ho hlokahala boholo bo bokae, kenya phaepe (kapa tubing) holim’a sefepi kapa phaephe (e atolosang hose), lekanya bophara bo ka ntle ba hose, ebe u khetha seqhoqho se lumellanang le bophara boo hoo e ka bang bohareng ba sebaka sa eona.Haeba sedikadikwe se ka ntle sa hose se tsejwa, se arole ka 3.14 (pi) ho fetolela sedikadikwe ho bophara.

Li-clamp tsa li-hose tse tloaelehileng ke tsona tse atileng haholo 'me li fumaneha lits'ebetsong tsa likoloi le tsa indasteri.Bophahamo bo fokolang ba clamp ke 3/8 ″ mme boholo bo tloaelehileng bo ka ba 8 7/16 ″.Li na le 1/2 ″ lihlopha tse sephara le 5/16 ″ slotted hex head screws.Li-clamp tsena li kopana kapa li feta litlhaloso tsa torque tsa SAE.

Li-clamp tsa li-hose tse nyane li sebelisoa ka li-hose tse nyane tsa bophara le li-tubing joalo ka mehala ea moea, mokelikeli le mafura.Bophahamo bo tlase ke 7/32 ″ mme boholo bo ka ba 1 3/4 ″.Lihlopha li bophara ba 5/16 ″ 'me screw ke 1/4 ″ e slotted hex hlooho.Boholo ba tsona bo nyane bo lumella ho kenngoa libakeng tse koaletsoeng.

Leha li-clamp tsa hose li ka hokahanngoa ho tloha pheletsong ho isa pheletsong ho theha tloaelo kapa boholo bo boholo, nahana ka ho sebelisa Create-A-Clamp ho fapana le ho etsa li-clamp tse fihlang ho 16 ft bophara.Li-Kits li kenyelletsa 50 ft roll ea 1/2 ″ e bophara ba banding e bolelele ba eona habonolo, li-fasteners tse 20 (li-slotted band ends le matlo a nang le captive screw/worm gear), le likaroloana tse 10 tsa ho kopanya bolelele bo bokhutšoane ba banding.Likarolo tsohle ke tšepe e sa hloekang 'me 5/16 ″ slotted hex head screws ke maemo.Ho fapana le litsamaiso tse ling tsa banding / strapping, ha ho na lisebelisoa tse khethehileng tse hlokahalang ntle le tin snips le screwdriver kapa hex driver.Li-hose clamps tsena tsa worm drive hose li ka ntšoa habonolo le ho khutlisoa hape, kapa tsa etsoa tse nyane kapa tse kholoanyane (khaola banding ho etsa tse nyane; sebelisa splice le banding e eketsehileng ho etsa kholoanyane).

Li-clamps tsa hose tsa tšepe tse sa hloekang, tse buelloang bakeng sa lisebelisoa tse ngata, li na le sehlopha sa tšepe e sa hloekang;screw plated le housing fana ka toka kutu.Bakeng sa ho hanyetsa kutu e ntle, khetha li-clamps tsohle tsa tšepe tse sa hloekang, tse nang le bante ea tšepe e sa hloekang, sekoti le matlo.Li-clamps tsena tsa boleng ba hose li entsoe ke moetsi oa malapeng.

Ho li-fittings tsa barb e le 'ngoe, beha seqhoqho sa hose sebakeng sa phomolo.Ho li-fittings tse ngata tsa barb, etsa bonnete ba hore clamp e behiloe holim'a li-barbs.Se ke oa feta torque e khothalelitsoeng ea ho tiisa bakeng sa clamp.

Li-clamps tsena ha li khothalletsoe hore li sebelisoe ka li-hose tse bonolo, tse kang silicone, hobane hose e ka fetisoa kapa ea kuta ka li-slots tsa sehlopha.Hape, etsa bonnete ba hore clamp eo u e khethang e loketse ts'ebeliso.